YSHIELD® U2S | EMF Bed Canopy Mat | Double Bed (280cm) | STEEL-TWIN


EMF Protection double bed canopy mat from YSHIELD® providing high shielding attenuation for use with compatible EMF sleep canopies - 280cm wide

To achieve a full Faraday cage with a canopy, it is also necessary to shield from below. This canopy base has a very high shielding attenuation, lies very flat and is delivered including the entire necessary grounding material.

With 41 dB attenuation optimal for all canopies made from VOILE, NATURELL and SILVER-TULLE. Made from shielding fabric STEEL-TWIN. The stainless-steel-side should face towards the floor, the white cotton-side upwards. Directly laid under the canopy, the sewed edges would be too thick under a carpet.

This double bed canopy base is for use with the YSHIELD SILVER-TULLE EMF Sleep canopy. It comes with the Conscious Spaces EMF Canopy Bundle.

Whats included?

The canopy base comes with grounding plug GP1 for schuko sockets E/F and the canopy connector GCMV for canopies (you can choose if you want to connect the canopy with a velcro or magnet).

This canopy base consists of two panels that are placed with an overlapping of 5 cm, made of the material HNG80 with 80 dB shielding attenuation.

Small metal plates are pre-assembled at one end of each panel – grounding will be screwed onto them.

We recommend covering the canopy base with a fabric or carpet. This cover will also hide the 4 mm high electrical connectors and cables behind the bed.

Technical data

Attenuation: 42 dB

Size: Width 280 cm, length 240 cm

Materials: Polyester, copper, nickel, aluminium

Included: 1 sheet Steel-Twin with sewed on Velcro areas. No room decoration in the scope of delivery.

Attenuation | Grounding

This product shields high frequency electromagnetic fields (HF). The indicated dB-values apply to 1 GHz, view chart for other frequencies. Laboratory report ranging from 40/600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006, view report above.

This product with an electrically conductive surface shields low-frequency alternating electric fields (LF). For this purpose a grounding is necessary, i.e. an integration into the functional-equipotential bonding (FEB), please find suitable grounding accessories under "Grounding".

Care instructions

  • Washing up to 60°C
  • Iron without steam at degree 1
  • Drying at low temperature
  • No bleaching
  • No chemical dry-cleaning
  • Wash only with our special washing detergent TEXCARE, without enzymes or bleaching agents

Installation instructions

Not included in the scope of supply the grounding: 1 grounding plug GP1, 1 grounding connector GCV, 1 cable GL500.

YSHIELD® U1S | Canopy mat | Single bed | STEEL-TWIN


How do I test that it’s working?

If you have an EMF Meter (with Radio Frequency detection), this is the perfect way to test the canopy.

The second-best way is simple – use it!

Just get in and sleep in it. Give it three days for the body to adjust and feel the difference.

Please do not try and test a canopy is working using a mobile phone. When you bring a mobile phone into an EMF shielded space the mobile phone becomes an EMF repeater which intensifies the EMF frequencies inside the canopy. This is due to your mobile working harder to boost the signal so it can connect to make calls / texts / access the internet.

Will this protect against 5G?

Yes NATURELL EMF Protection fabric protects from 5G.

Can I Wash The Canopy?

Gentle cycle at 30°C with YSHIELD® TEXCARE detergents.

Iron without steam at degree 1, drying at low temperature, do not bleach or use any chemical dry-cleaning.

We suggest you keep washing to a minimum to retain optimal shielding capacity of the fabric.

Can This Canopy be Earthed (Grounded)?

The Swiss Shield NATURELL material can not be earthed. This is because the Swiss Shield fabric is not surface conductive and therefore will not require grounding. However, the SILVER-TULLE fabric contains more silver and will therefore attract electric fields which once grounded are discharged.

Do I need under-bed protection?

Yes. We believe if you want to be protected from low level EMFs such as the electric fields from the wiring in your walls then we recommend you always have the appropriate grounding mat so that canopy and mat are grounded to provide more complete protection.

Which EMF canopy should I get?

Every EMF bed canopy curated by Conscious Spaces has specific qualities. You can review these on the EMF Canopy comparison page.

Why should I order an EMF canopy from Conscious Spaces rather than from elsewhere?

We have tested the leading canopies currently available and have selected the ones that are proven to use high shielding materials that are great quality, high functioning and most importantly are easy to use.

What is the Conscious Spaces EMF Canopy Bundle?

The Conscious Spaces EMF Canopy Bundle is a curated canopy kit with the best products and materials available today, in one easy-to-assemble set, with clear setup instructions.

The EMF sleep canopy uses breathable fabrics and protects against high frequency radio waves and the current 5G signal as well as predicted increased 5G frequencies.

High frequency radio waves (WLAN, mobile radio, LTE etc) that hit the canopy are reflected, while low frequency AC currents are diverted by the earthed connection. Importantly, the Powerline filter is required to remove any ‘transients’ on the grounded cable, which may otherwise turn the canopy into an antenna.

The Canopy, combined with an EMF / RF Protective Bed Mat and Grounding kit provide an optimal EMF shielded environment for sleep.

How do I set up the Canopy, EMF / RF Protective Bed Mat and Powerline PLC HF Filter Grounding Kit?

The EMF / RF Protective Bed Mat is made of one of the strongest protection materials available but it does typically need grounding/earthing.

When grounding is in place, the mat provides not only protection from RF below, but equally importantly it protects from low frequency fields/EMFs that it would otherwise collect and radiate which would negate the health benefits received from the RF reflection. It is therefore imperative that this product is earthed.

Always ensure the EMF / RF Protective Bed Mat is spread out on the floor beneath the bed and covers as wide an area as possible which in turn will provide a complete seal when it connects with the draped canopy.

The best way to earth the canopy and EMF / RF Protective Bed Mat is directly into the ground outside with the aid of a copper pipe, however, this is not always possible so the next best way to ground is with the Powerline PLC HF Filter Grounding Kit.

Please remember to ensure your bed is at least six inches away from any wiring in the walls. If this is not possible, please use an on-demand switch, or better still: turn off the power to your bedroom at night time.

Please view these instructions with a common-sense attitude. If you have the type of fuse box that is easy to cut power to the bedroom, then always try to do that, but remember you should still use your under bed protection if you are above the ground floor to catch any RF from the floor below.

Where should the EMF / RF Protective Bed Mat be placed?

The EMF / RF Protective Bed Mat should go on the floor underneath the bed. It is important to make sure the EMF Canopy touches the EMF / RF Protective Bed Mat all the way around.

Why is my canopy not working or making me feel worse?

1. The airflow is restricted: Open one quarter where EMF intrusion is weak.
2. Detox occurring: Give it time.
3. The canopy is not earthed properly: Check and secure earthing.
4. There are gaps between or the mat and canopy don’t touch: Check & secure.
5. There are some manufacturing residuals: Air on a washing line or gentle wash.
6. Metal springs in the mattress: Change the mattress.

Will my mobile phone work inside the canopy? Can I use my mobile phone to test the frequencies?

Your mobile phone will work in an EMF canopy however we strongly recommend you do not bring it into the canopy. This is because when you bring a mobile phone into an EMF shielded space the mobile phone becomes an EMF repeater which intensifies the EMF frequencies inside the canopy. This is due to your mobile working harder to boost the signal so it can connect to make calls / texts / access the internet. 

For this same reason, it isn't accurate or appropriate to test for EMF frequencies inside the canopy using a mobile phone.

You may also like