Centre for Implosion Research

Vortex Water Energiser

£140
Finish:
Quantity:

The Vortex Energiser is used to improve the energetic quality of water. Attach it to your domestic water inlet pipe and energise all the water in your house instantly and constantly. There are no further maintenance requirements.

What does a Vortex Water Energiser do?

The Vortex Energiser is a spiralling copper device. It contains water which has been prepared in an implosion machine.

The Vortex Energiser is used to improve the energetic quality of water.

Direct contact with water is not necessary as the energy is transferred by way of vibration. This process is similar to one tuning fork picking up the vibration of another tuning fork, even if the first one has not been struck. This is also called resonance.

No electrical power supply is required.

Why do you need an Vortex Water Energiser?

Mains water supply systems are exposed to the detrimental energetic effects of straight unnatural water pipes, high mains pressures and chemical treatments. Water is not allowed to move in its naturally winding way thereby causing loss of life force.

We believe that water has a "memory" which is attributed to the dipolar structure of the water. Hundreds of water molecules group together and form clusters, in which colloidal minerals and biophotons (light energy) interact.

These clusters are very sensitive structures and are impressionable by vibrational influences. In this way water acts as a receiver and transmitter of information. Homeopathy is based on this principle.

What are the benefits of a Vortex Water Energiser?

The Vortex Energiser when attached to the domestic water inlet pipe, energises all the water in the house – instantly and constantly. There are no further maintenance requirements.

The obvious physical changes to tap water as reported by users since 1998 include:

  • the clarity of the water improves, some people can actually see a purply blue hue around the water, which is part of the emanations coming from the water
  • water regains a remarkable natural quality and taste, becoming more palatable and less hard
  • the taste and smell of chlorine is much reduced or even eliminated
  • Lime scale deposits become soft and are eventually removed
  • Bathing in energised water is a reviving experience leaving skin supple and soft
  • fresh food and cut flowers last longer
  • water virtually doesn’t become stagnant and foul smelling

What is a Vortex Water Energiser used for?

The Vortex Energiser is being used for both domestic, industrial and farming applications - including drinking water, wastewater, soil, compost and irrigation treatment.

In industrial trials in Holland and Spain, the Vortex Energiser was able to turn compost from an anaerobic state to an aerobic state. Following these successes an industrial version of the Vortex Energiser was developed.

What is a Vortex Water Energiser made from?

Made from heavy gauge copper tubing, this robust energiser is designed to meet the demands of industrial use.

Is it easy to install?

The Vortex Water Energiser is very easy to install. It comes with simple to use straps that enable you to attach it to your mains water pipe where it enters your house. You do not need to be a plumber, you can do it yourself!

Attachment to heating and cooling systems

Before you fix the Vortex Energiser permanently to the mains water pipe, we recommend you first use it on all closed heating and cooling systems, such as the central heating, the fridge and the freezer. Because these are closed systems, permanent fixture of the Vortex Energiser is not necessary. 24 hours is usually sufficient to transfer the energy permanently.

To energise the domestic central heating system lay the Vortex Energiser on the floor with the apex (the pointed end) pointing at and touching a pipe coming down from one of the radiators.

Leave the Vortex Energiser in this position for 24 hours, preferably with the heating on. This will ensure that the energy is taken on by the whole system.

To energise all the food in the fridge, place the Vortex Energiser in the fridge for 24h. You may find that everything in the fridge remains fresh longer.

Please do not put the Vortex Energiser in the freezer. Freezing the Vortex Energiser may cause the rivets, which seal the tube ends, to pop out. Just place the Vortex Energiser on or next to the freezer for 24 hours.

You may carry out the same procedure with your car’s cooling system or even submerge the Vortex Energiser in your garden pond or swimming pool.

Attachment to main water supply pipe

After you have dealt with the closed heating and cooling systems we recommend that you attach the Vortex Energiser permanently to your drinking water system.

You need the Vortex Energiser here at all times to ensure that new incoming water becomes energised. For maximum efficiency the Vortex Energiser needs to be fixed to the main pipe in such a way that its apex (the pointed end) is in direct contact with the pipe.

The two straps provided with the device are used to tie the apex and the top winding of the Vortex Energiser to the pipe. This method of attachment works equally well for vertical and horizontal pipes. If this method of attachment doesn’t work in your situation, having the apex of the Vortex Energiser touching the pipe will work equally well.

More than one mains water supply?

In some types of accommodation, there may be more than one mains water supply pipe and pipes may be less accessible. In this case the Vortex Energiser can be placed in a position near the taps. In a bathroom for instance, water flowing into the sink, bath tub or shower takes on the energy from one centrally suspended Vortex Energiser.
However, if energised water is required in the kitchen as well as bathroom, another Vortex Energiser will have to be installed.
The applications of the Vortex Energiser seem to be endless. So many uses can be found in the house, garden, office and in industrial applications.
We invite you to experiment with the Vortex Energiser for yourselves.

You may also like