Curtis Dyna-Fog

Hurricane ES - Electrostatic Fogger

£675
Plug Type:

The fastest and most effective way to distribute water based mould solutions. Each droplet is electrostatically charged for consistent coverage, better surface contact and optimum economy.

The process of fogging was first developed in the 1940’s for use in wartime aviation. Subsequently in the 1950’s, fogging machines were adapted and developed commercially for use.

Fogging is the process of using large volumes of air at low pressure to transform liquids into tiny droplets that are dispersed into the atmosphere. These Ultra Low Volume (ULV) droplets are perfect for the application of mould solutions.

We recommend using the Hurricane ES Fogger with Micro Balance EC3 Mould Solution Concentrate.

Electrostatic Fogging

The Hurricane ES from Curtis Dyna-Fog uses electrostatic technology to give each droplet a small electrostatic charge.

This technology allows for consistent coverage, better surface contact and optimum economy.

The Hurricane ES high capacity charging system administers a positive electrostatic charge to each tiny droplet as they are propelled through the air at high speed.

This action has two effects on the droplets containing the active ingredient:

Droplets with a positive charge repel each other giving better dispersion and coverage.

1. Droplets with a positive charge repel each other giving better dispersion and coverage.

Positively charged droplets make stronger and quicker contact with surfaces compared to those from standard non-electrostatic foggers.

2. Positively charged droplets make stronger and quicker contact with surfaces compared to those from standard non-electrostatic foggers.

Perfect for high touch surfaces, the Hurricane ES allows for quicker application time, more economy so you can get back to life with confidence.

Fogger Coverage

This product is the Hurricane ES Electrostatic Fogger and covers 6.075m²/min. If you don't need such high coverage you may like to consider the Hurricane Fogger which covers 4.09m²/min.

Product Benefits

Each droplet is electrostatically charged for consistent coverage, better surface contact and optimum economy.

Made in the UK CE approved & independently verified.

Fast, effective and economical 2 Year Warranty Electrostatic Technology.

Product Features

The fastest and most effective way to distribute EC3 Mould Solutions.

  • On/off switch with light
  • High capacity charging system
  • 3 precision nozzles for greater output capacity
  • Adjustable locking
  • Removable filling cap with tether
  • Stainless steel precision metering valve with filter
  • Translucent corrosion and impact resistant tank

Technical Specifications

Tank size

3.8 litre

Flow rate

0 - 120ml per minut

Droplet size

VMD 40 – 70μm

Droplet throw

4.5 metres

Droplet plume

4.6 metres

Coverage

6.075m²/min

Formulations

Water-based

 

How to use the Fogger with EC3 Mould Concentrate

Fill fogger drum with EC3 Mold Solution Concentrate diluted per bottle instructions.

Use the calibration dial to select the spray volume needed.

Enter the room or space where the fogger will be used. Plug the fogger into your power outlet. (We suggest using an extension cord to have more ability to move around a room or an object for best coverage.)

Turn the fogger on and disperse the mist in a steady up/down motion, so that it fully fills and covers a room, or so that it is evenly applied all over a surface or object.

Hold the fogger steady with the handle to ensure a steady flow of EC3 through the machine.

Turn off when finished.

Drain and clean fogger after use.

EC3 Mold Solution Concentrate is safe for all materials, surfaces and fabrics. It is safe to treat items and areas as often as needed. EC3 Mold Solution Concentrate is safe for children and pets, does not off-gas, contains no harmful chemicals, and is not toxic. The fogger is best used to treat larger areas or items.

You may also like