Osmio Carbon Block Whole House Filter System reduces chlorine, pesticides, and more chemicals for the whole house

Osmio 4.5" x 10" Carbon Block Whole House Filter System

The Osmio 4.5" x 10" Carbon Block Whole House System consists of a 4.5" x 10" Blue Housing with Carbon Block 5 Micron.

The carbon block filter is made from dried coconut shells and is highly effective at the reduction of chlorine and taste and odour issues that may be present in the mains tap water. The carbon block also reduces certain Volatile Organic Chemicals (VOC) from drinking water. The coconut base of the carbon also makes a slightly sweeter taste which is pleasant. The carbon block has a very high dirt holding capacity with virtually zero pressure drop. The filter is rated for 46,000 litres so is usually changed every 6 months.

Frequently asked questions:

1) Does the system reduce my pressure/flow rate? The system will reduce your pressure by a few psi which is a negligible reduction in flow rate and so the answer is no, not in any noticeable way at all.

2) How often do I change the filter? Every 6 months or longer depending on usage. The filter's rated capacity is 46,000 litres.

3) Is it easy to change the filter? Yes very easy. You simply shut off the incoming water and use the provided housing spanner to loosen the housing bowl. Then you remove the filter and put in the new one and screw the bowl back on.

4) Can anyone install it? Yes any handy person or plumber will find it very easy to install.

More Information

Model

Osmio 4.5 x 10 Inch Carbon Block Whole House Filter System

Filter Specifications:

• Thick wall carbon construction for superior performance. Low cost for economy!
• Reduces Chlorine/Taste/Odor (CTO) and certain Volatile Organic Chemicals (VOC) from drinking water using coconut base carbons for a sweeter taste.
• Very high dirt holding capacity
• Zero carbon fines
• Virtually zero pressure drop

Specifications:

• Micron Rating: 5 Nominal
• Dimensions: 10" x 4.5"
• Filter Media: Coconut Base Carbon
• Netting: Polypropylene
• Filter Life: 10,000 Gallons; Recommended filter change every 6 months.

Housing Specifications:

• Straight thread design on sump EPDM O-ring
• Max Pressure: 90 psi (6.3 bar)
• Max Temperature: 125°F
• Flow rate: 40 litres per minute
• Inlet/Outlet: 1"
• Housing Options: Pressure Relief

The Housing has the following dimensions:

• Height: 14 "
• Width: 7-1/4 "

Pressure Loss: To help avoid any potential disappointment with resulting pressure loss, we advise not to install this system if your standing water pressure is lower than 1.5 bar.

Filter Parameter

Chlorine, Sediments

Warranty & Aftercare

This product comes with a warranty. Terms apply. Please see the downloadable manual for warranty terms.