UMH Heat - Structured Water Device for Heating Circuits
Structured Water Device for Heating Circuits
The UMH Heat offers an effective solution to energise the heating water especially for underfloor heating and heating circuits.
Siltation of the circuit water is thus prevented or reversed.
Made of brass, the device is equipped with a special ceramic composition.
Inside, a hyperbolic flow cycle and handmade glass vials provide a highly stable energy field. The negative effects of underfloor heating, such as heavy legs, fatigue, circulatory problems, etc., are eliminated by the energised quality of the water and the water remains clear for years.
In addition, as a result of the improved thermal conductivity of the heating water, a significant saving in heating energy has been observed.
Areas of application of UMH Heat
- Underfloor heating
- Wall heating
- Heating circuits
UMH Heat Product Benefits
- Protects the heating circuit system from silting up
- Transmission of constructive energies via the underfloor heating system
- Increasing the quality of housing
- The heating water remains clear for years
- At least 5 % heating cost savings
- Without electricity, without chemistry, without magnets
- Maintenance-free
UMH Heat Technical Specifications
| Thread | 1″ | 5/4″ | 6/4″ | 2″ | 2.5″ | 3″ |
| Length in mm: | 99 | 108 | 108 | 109 | 172 | 172 |
| Diameter in mm: | 50 | 79 | 79 | 79 | 123 | 123 |
| Flow rate l/min: | 70 | 100 | 150 | 300 | 470 | 590 |
| Weight in kg: | 0.7 | 2.1 | 2.1 | 2.0 | 8.1 | 6.9 |
| Water pressure: | 10 bar | 10 bar | 10 bar | 10 bar | 10 bar | 10 bar |
FAQ
Is there a minimum pressure (PSI) required?
No, the device does not require a minimum water pressure (PSI) to operate. It is designed to function effectively under normal water conditions without a specific minimum pressure requirement.
Is the device lead-free?
Yes, the device is made using the latest CW724R brass alloy, which uses silicon as an alternative to lead. This modern lead-free material ensures the device meets current standards for safe water contact applications while maintaining durability and performance. Please refer to the Technical data sheet below.
UMH Technical Data Sheet
UMH Heat - Structured Water Device for Heating Circuits
- Inventory on the way
Structured Water Device for Heating Circuits
The UMH Heat offers an effective solution to energise the heating water especially for underfloor heating and heating circuits.
Siltation of the circuit water is thus prevented or reversed.
Made of brass, the device is equipped with a special ceramic composition.
Inside, a hyperbolic flow cycle and handmade glass vials provide a highly stable energy field. The negative effects of underfloor heating, such as heavy legs, fatigue, circulatory problems, etc., are eliminated by the energised quality of the water and the water remains clear for years.
In addition, as a result of the improved thermal conductivity of the heating water, a significant saving in heating energy has been observed.
Areas of application of UMH Heat
- Underfloor heating
- Wall heating
- Heating circuits
UMH Heat Product Benefits
- Protects the heating circuit system from silting up
- Transmission of constructive energies via the underfloor heating system
- Increasing the quality of housing
- The heating water remains clear for years
- At least 5 % heating cost savings
- Without electricity, without chemistry, without magnets
- Maintenance-free
UMH Heat Technical Specifications
| Thread | 1″ | 5/4″ | 6/4″ | 2″ | 2.5″ | 3″ |
| Length in mm: | 99 | 108 | 108 | 109 | 172 | 172 |
| Diameter in mm: | 50 | 79 | 79 | 79 | 123 | 123 |
| Flow rate l/min: | 70 | 100 | 150 | 300 | 470 | 590 |
| Weight in kg: | 0.7 | 2.1 | 2.1 | 2.0 | 8.1 | 6.9 |
| Water pressure: | 10 bar | 10 bar | 10 bar | 10 bar | 10 bar | 10 bar |
FAQ
Is there a minimum pressure (PSI) required?
No, the device does not require a minimum water pressure (PSI) to operate. It is designed to function effectively under normal water conditions without a specific minimum pressure requirement.
Is the device lead-free?
Yes, the device is made using the latest CW724R brass alloy, which uses silicon as an alternative to lead. This modern lead-free material ensures the device meets current standards for safe water contact applications while maintaining durability and performance. Please refer to the Technical data sheet below.
UMH Technical Data Sheet