YSHIELD® V4A03 | Stainless Steel Mesh | Width 90 cm | Length 1m

YSHIELD® V4A03 | Stainless Steel Mesh | Width 90 cm | Length 1m

Products YSHIELD® V4A03 | Stainless steel mesh
Products YSHIELD® V4A03 | Stainless steel mesh - close up
Products YSHIELD® V4A03 | Stainless steel mesh - attenuation graph

YSHIELD® V4A03 corrosion-resistant EMF shielding stainless steel mesh provides shielding for drywall constructions with an EMF shielding of 55 dB

NOTE: This EMF shielding mesh is 90cm wide and is sold in units of 1m lengths.

Why use YSHIELD® V4A03 EMF Shielding stainless steel mesh ?

YSHIELD® V4A03 is an extremely fine woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF).

V4A (AISI 316) is resistant against water, water vapor, air humidity, mild acids and in coastal areas against salty seawater!

What is YSHIELD® V4A03 EMF Shielding mesh used for?

Typical application due to the thin filaments is as a flyscreen, in roof areas, drywall constructions or loosely laid, etc.

How do you apply YSHIELD® V4A03 EMF Shielding mesh?

A typical application is identical to that of a regular flyscreen in commercial tenter frames.

When used in under the floor covering (laminate, parquet, PVC coating, etc.) V4A03 can be fixed with the adhesive used for the floor covering.

For drywall construction and in roof area the mesh elements can be bolt or stapled together.

The rule is: Always overlap the single elements at least 5 cm.

For grounding use the perforated stainless steel tape GSS10 by screwing it right across the elements into the surface.

YSHIELD® V4A03 EMF Shielding Mesh Graph

YSHIELD® V4A03 Stainless steel mesh attenuation graph

V4A03 EMF Shielding Mesh Attenuation | Grounding

  • This product shields high frequency electromagnetic fields (HF). The indicated dB-values apply to 1 GHz, view chart for other frequencies. Laboratory report ranging from 40/600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006.
  • This product with an electrically conductive surface shields low-frequency alternating electric fields (LF). For this purpose a grounding is necessary.

Technical data

  • Width: 90 cm
  • Length: Sold by the meter (m)
  • Use: Interior and exterior use
  • Attenuation: 55 dB
  • Mesh Width: 0.3 mm
  • Wire diameter: 0.08 mm
  • Material thickness: 0.16 mm
  • Open area: 54%
  • Weight: 200 g/m²
  • Color: Silver
  • Fire-proof material, A1 according DIN 4102:1994.
  • Surface conductivity: 0.03 Ohm (square resistance)

YSHIELD® V4A03 | Stainless Steel Mesh | Width 90 cm | Length 1m

Regular price $16
/

  • In stock, ready to ship
  • Inventory on the way
Select
Tax included where applicable. Shipping calculated at checkout.

YSHIELD® V4A03 corrosion-resistant EMF shielding stainless steel mesh provides shielding for drywall constructions with an EMF shielding of 55 dB

NOTE: This EMF shielding mesh is 90cm wide and is sold in units of 1m lengths.

Why use YSHIELD® V4A03 EMF Shielding stainless steel mesh ?

YSHIELD® V4A03 is an extremely fine woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF).

V4A (AISI 316) is resistant against water, water vapor, air humidity, mild acids and in coastal areas against salty seawater!

What is YSHIELD® V4A03 EMF Shielding mesh used for?

Typical application due to the thin filaments is as a flyscreen, in roof areas, drywall constructions or loosely laid, etc.

How do you apply YSHIELD® V4A03 EMF Shielding mesh?

A typical application is identical to that of a regular flyscreen in commercial tenter frames.

When used in under the floor covering (laminate, parquet, PVC coating, etc.) V4A03 can be fixed with the adhesive used for the floor covering.

For drywall construction and in roof area the mesh elements can be bolt or stapled together.

The rule is: Always overlap the single elements at least 5 cm.

For grounding use the perforated stainless steel tape GSS10 by screwing it right across the elements into the surface.

YSHIELD® V4A03 EMF Shielding Mesh Graph

YSHIELD® V4A03 Stainless steel mesh attenuation graph

V4A03 EMF Shielding Mesh Attenuation | Grounding

  • This product shields high frequency electromagnetic fields (HF). The indicated dB-values apply to 1 GHz, view chart for other frequencies. Laboratory report ranging from 40/600 MHz to 40 GHz according to standards ASTM D4935-10 or IEEE Std 299-2006.
  • This product with an electrically conductive surface shields low-frequency alternating electric fields (LF). For this purpose a grounding is necessary.

Technical data

  • Width: 90 cm
  • Length: Sold by the meter (m)
  • Use: Interior and exterior use
  • Attenuation: 55 dB
  • Mesh Width: 0.3 mm
  • Wire diameter: 0.08 mm
  • Material thickness: 0.16 mm
  • Open area: 54%
  • Weight: 200 g/m²
  • Color: Silver
  • Fire-proof material, A1 according DIN 4102:1994.
  • Surface conductivity: 0.03 Ohm (square resistance)

Shipping enquiry

Shipping enquiry for YSHIELD® V4A03 | Stainless Steel Mesh | Width 90 cm | Length 1m

Looks like you are outside the UK, this product will need custom shipping.

Please enter your details below and we will contact you with a quote as soon as possible.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

YSHIELD® V4A03 | Stainless Steel Mesh | Width 90 cm | Length 1m reviews

More from YSHIELD®
More from YSHIELD®
Recently viewed