Osmio Zero 3.0 Hydrogen Reverse Osmosis System
Osmio Zero 3.0 Hydrogen Reverse Osmosis System
Add Extras
Osmio Zero 3.0 — Next-Generation Countertop Water System
The Osmio Zero 3.0 is a complete countertop water station: a kettle replacement, RO purifier, and hydrogen water system in one sleek unit. Building on the popular Zero 2.0, the 3.0 adds chilled water, UV sterilisation, improved tank design, easier filter changes and enhanced performance — a little bigger, a lot better.
Key Benefits
- All-in-one convenience: Instant hot, chilled and ambient water — no waiting for a kettle.
- RO purity: Advanced reverse osmosis filtration removes a wide range of contaminants for clean, great-tasting water.
- Molecular hydrogen Hydrogen (H2) generation for users who want hydrogen-enriched water as part of their wellness routine.
- Extra safety: Built-in UV sterilisation provides an additional barrier against microorganisms.
- Hygienic tank design: Larger capacity with complete separation of raw and concentrated (waste) water to avoid cross-contamination.
- Simple maintenance: Tool-free, fast filter changes and clearer service indicators make upkeep quick and tidy.
What’s New vs Osmio Zero 2.0
| Feature | Osmio Zero 2.0 | Osmio Zero 3.0 |
|---|---|---|
| Water Types | Hot & ambient | Hot, ambient & chilled |
| Filtration | Multi-stage | Multi-stage RO (0.0001μm) + Carbon Post filter |
| Hydrogen | — | Molecular hydrogen generation (for all water setting except Cold/Chilled) |
| UV Sterilisation | No | Built-in UV for extra safety |
| Tank | Smaller, partial separation | Larger tank with full raw/concentrate separation |
| Filter changes | Standard | Quicker, better designed replacement |
Technical Highlights
- RO membrane: High-flow 200G reverse osmosis element (filtration down to 0.0001 μm).
- 3-stage filtration: PAC composite pre-filter, RO membrane, CF carbon composite postfilter.
- Tank capacity: Larger raw-water capacity with complete separation of concentrated waste water.
- Temperature control: Precise hot water temperatures for tea and coffee; chilled and ambient settings on demand.
- UV steriliser: Secondary disinfection stage for improved microbiological safety.
- Maintenance: Typical filter lifespan 6 months (up to 12 months depending on water quality and usage).
Who Is It For?
The Osmio Zero 3.0 is perfect for households and small offices that want an all-in-one solution: instant hot water for beverages and cooking, chilled water for refreshment, and high-purity RO water for drinking and cooking — all with easy maintenance and advanced safety features.
Care & Maintenance
Regular filter changes and periodic sanitisation keep performance optimal. Filters typically last around 6 months in normal use; actual life depends on local water quality and consumption. See the manual for the full maintenance and sanitisation procedure.
How to Sanitise and Change Filters for the Osmio Zero 3.0 Hydrogen Reverse Osmosis System
Buy with Confidence
Slightly larger than the Zero 2.0 but packed with meaningful improvements: better hygiene, more functionality and easier upkeep. Upgrade to the Osmio Zero 3.0 and enjoy purer, tastier water — instantly.
Osmio Zero 3.0 Setup Guide
Includes: 3-stage filter set fitted and warranty. Filters sold separately as replacements.
More Information:
Technical Parameters
Power Chord Length: 160cm
Rated voltage : 220V~
Rated frequency : 50Hz
Rated power: 2200W
Rated heating power : 2100W
Rated cooling power : 68W - chilled water cannot be dispensed continually but rather a glass by glass. The system will display "PREP" and the compressor go into a cooling cycle. The temperature of the dispensed chilled would be dependant on the PREP state and the environment temperature. When room temperature is 25°C - dispensing temperature would be 12-13°C, when it is 30 degrees - it will be around 14-15°C. The capacity is 500ml replenished every 20-30 minutes.
Milk 45-48°C
Coffee - 82-86°C
Tea - 88-92°C
Hot - >90°C (press and hold Hot key for 3 seconds , then small cup to lower it - lowest 85) and Big cup to go up to maximum 95°C)
Electrical power consumption : 0.1kW/24h
Idle (Hydrogen Production OFF) : 0.010 kWh
Idle (Hydrogen Production ON) : 0.018 kWh
RO Pump (Filtering) : 0.039 kWh
Chiller (Fan Running) : 0.071 kWh
Hot Water : 2.01 kWh
Water heating capacity : 18L/h(>90°C)
Water production flow : 30L/h
Dispensing flow rate: approx. 500ml per min
Working pressure : 0.4~0.6MPa
Applicable water source : Mains or Private Supply Meeting UK Standards
Applicable water temperature : 5-38°C
Water tank capacity : 6L/2.5L
Net weight : 11 kg
Dimensions: 475x240x430mm
UV Sterilisation Info:
This is the UV in the system at the bottom of the 2.5 litre tank which is on unless the system is in sleep mode or turned off. It will always be on during dispensing and filtering or when the ORP drop down to -900, it kicks in h2 production and stops when it reaches -1400mv ORP.
Wavelength: 270 ÷ 280 nm
LED Type: 3535
LED power: 8-12 mW
Beam angle: 120°
Average life: 10,000 hours
Degree of protection: IP67
Power supply: 12 VDC
Current consumption: 50 mA
Operating temperature: -20°C to +60°C
Dimensions (mm): 36.4 (max. diameter) x 23.3
Weight: 22 grams
Limited Warranty
The Osmio Zero 3.0 is covered by a 12-month manufacturer’s warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal residential use. During this period, defective parts may be repaired or replaced at the discretion of the manufacturer.
Important – Statutory Rights:
This warranty is in addition to your statutory rights. Under UK and EU law, consumers are entitled to a minimum 2-year legal guarantee for electronics and appliances purchased for home use. This means you may have rights to repair, replacement, or refund if the product is faulty, even after the 12-month manufacturer warranty has expired.
What the Warranty Covers:
Defects arising from normal use of the system.
Repair or replacement of defective parts at the manufacturer’s discretion.
What the Warranty Does Not Cover:
Damage caused by misuse, neglect (including leaving it for weeks unused), accidental damage, or failure to follow the user manual.
Damage from improper setup, external forces, or incompatible water/electrical supply.
Consumable parts (filters, tanks, seals) unless they are defective.
Consequential or incidental damages.
Making a Warranty Claim:
Keep your proof of purchase.
Contact the retailer or an authorized service agent with your purchase details and a description of the issue.
Follow the instructions provided for repair or replacement.
Note: This warranty does not replace or limit your statutory consumer rights.
