Swiss Shield
Luxury Swiss Shield Four-Poster EMF Protection Bed Canopy
| Delivery time for this product is approximately 4-6 weeks |
Luxury Swiss Shield EMF Protection bed canopy providing EMF protection while you sleep
NOTE: You need to buy a EMF/RF Bed Mat to create a full shielding experience.
Restore healthy sleep patterns and rejuvenate your health by minimising radiation from mobile phone masts, WiFi, smart meters and most other wireless radiation.
This is the original EMF-Shielding Four-Poster Box Canopy using the renown Swiss Shield EMF protection fabrics.
With easy access through side slits and tie-backs for the day, this canopy functions and looks fantastic too.
The canopy comes with comprehensive instructions and is really easy to hang from your ceiling via height-adjustable straps. Everything is supplied for the installation – all you need to add is a tape measure. The installation takes about 20 minutes.
The canopy comes in a range of sizes to suit UK and US beds. The height of the canopy is a standard 2m, with the option to extend the straps by a further metre.
This luxury EMF bed canopy has been designed and manufactured in the UK since 2008.
Swiss Shield EMF Protection Materials
The Luxury Swiss Shield Four-Poster EMF Protection Bed Canopy comes in a choice of Swiss Shield materials Ultima and Naturell.
Ultima has excellent EMF shielding efficiency and is slightly heavier weight. Naturell has a very good EMF shielding efficiency.
Both can be washed on a delicate cycle and its durability extends to 40 washes, provided the care instructions are adhered to.
Swiss Shield Ultima Material Characteristics
| Shielding Efficiency | Excellent | ||||||||||
| Material |
Cotton, 18 % copper / silver |
||||||||||
|
Yarn |
Cotton fibre spun with a gossamer-thin 0.02 mm silvered copper thread | ||||||||||
| Surface |
Non-conductive (PES-coated) | ||||||||||
| Description |
High-quality, translucent, lightweight, semitransparent cotton fabric with all textile characteristics | ||||||||||
| Weight | 88 g/m2 | ||||||||||
| Colour |
Natural (ecru/off-white) | ||||||||||
| Shielding |
|
||||||||||
|
Attenuation dB / % |
10 dB = 90 % 20 dB = 99 % 30 dB = 99.9 % 40 dB = 99.99 % 50 dB = 99.999 % 60 dB = 99.9999% |
Swiss Shield Ultima Material Graph
Swiss Shield Naturell Material Characteristics
| Shielding Efficiency | Very Good | ||||||||||
| Material |
Cotton, 18 % copper / silver | ||||||||||
|
Yarn |
Cotton fibre spun with a gossamer-thin 0.02 mm silvered copper thread | ||||||||||
| Surface |
Non-conductive (PES-coated) | ||||||||||
| Description |
High-quality, translucent, lightweight, semitransparent cotton fabric with all textile characteristics | ||||||||||
| Weight | 69 g/m2 | ||||||||||
| Colour |
Natural (ecru/off-white) | ||||||||||
| Shielding |
|
||||||||||
|
Attenuation dB / % |
10 dB = 90 % 20 dB = 99 %> 30 dB = 99.9 % 40 dB = 99.99 % 50 dB = 99.999 % 60 dB = 99.9999% |
Swiss Shield Nautrell Material Graph
EMF Protection Canopy Sizes
| Single | 90 x 190 x 200cm |
| Double | 135 x 190 x 200cm |
| King | 150 x 200 x 200cm |
| Super King | 185 x 200 x 200cm |
FAQ
How does it attach to the ceiling?
The canopy comes with six or eight Screwfix hooks, depending on size, which simply screw into the plasterboard, no drills required.
Is it hard to put up?
It needs about 20 minutes and some patience. They come with comprehensive instructions.
How do I test that it’s working?
If you have an RF detector, then this is the perfect way to test the canopy. The second-best way is simple – use it! Just get in and sleep in it. Give it three days for the body to adjust and feel the difference.
Does it come with a warranty?
Yes, two years like-for-like replacement subject to any issue not being ‘self-inflicted’, i.e. tears due to misuse or not following washing instructions.
Can I return it?
Yes, we offer ‘no-quibble’ returns within 30 days of purchase. Contact us for more info.
Can I Wash The Canopy?
Yes; however, it can only be washed up to 40 times. Wash gently without detergent, do not tumble dry.
Can This Canopy be Earthed?
Yes, we recommend purchasing a grounding cable for this.
Do I need under-bed protection?
Yes. We believe if you want to be protected from low level EMFs such as the electric fields and magnetic fields from the wiring in your walls then we recommend you always have the appropriate grounding mat so that canopy and mat are grounded to provide more complete protection.
Why is my canopy not working or making me feel worse?
1. The airflow is restricted: Open one quarter where EMF intrusion is weak.
2. Detox occurring: Give it time.
3. The canopy is not earthed properly: Check and secure earthing.
4. The earthing is to an earth that carries dirty electricity: connect to copper pipe in the garden.
5. There are gaps between or the mat and canopy don’t touch: Check & secure.
6. There are some manufacturing residuals: Air on a washing line or gentle wash.
7. Metal springs in the mattress: Change the mattress.
Which EMF canopy should I get?
We typically recommend the Blocsilver canopy as this is the new leader in terms of protection offered as well as being transparent and very breathable.
You'll need an EMF / RF Protective Bed Mat to go with the canopy to ensure you're protected from underneath. However, you do not need an EMF / RF Protective Bed Mat if you sleep on the ground floor and there is no wiring underneath your flooring.
As well as the EMF / RF Protective Bed Mat you'll also need a Powerline PLC HF Filter Grounding Kit. This includes: 1 x BlocEarth Filter, 1 x Grounding Cable and 2 x Grounding Screw. This kit ensures any ‘noise’ on the earth wire from smart meters, powerline adaptors and the like is filtered out and so cannot affect the canopy.
Why should I order an EMF canopy from Conscious Spaces rather than from elsewhere?
We only use products and materials that are high quality, high functioning, and that we absolutely love. Our EMF Canopy Bundle is a Conscious Spaces selected canopy kit with the best products and materials available in the UK today, in one easy-to-assemble set, with clear setup instructions.
The canopy uses breathable fabrics and protects against high frequency radio waves and the current 5G signal as well as predicted increased 5G frequencies.
High frequency radio waves (WLAN, mobile radio, LTE etc) that hit the canopy are reflected, while low frequency AC currents are diverted by the earthed connection. Importantly, the Powerline filter is required to remove any ‘contaminants’ on the grounded cable, which may otherwise turn the canopy into an antenna.
The Canopy, combined with an EMF / RF Protective Bed Mat and Grounding Plates & Cables, provide an optimal shielded environment for sleep.
Do I need to ground my EMF canopy?
This depends on the canopy: the Blocsilver requires grounding, however the Swiss Shield does not. This is because the Swiss Shield fabric is not surface conductive and therefore will not require grounding. However, the Blocsilver fabric contains more silver and will therefore attract electric fields which once grounded are discharged.
The Powerline PLC HF Filter Grounding Kit is perfect for grounding your EMF Blocsilver canopy.
This kit includes: 1 x BlocEarth Filter, 1 x Grounding Cable and 2 x Grounding Screw. This kit ensures any ‘noise’ on the earth wire from smart meters, powerline adaptors and the like is filtered out and so cannot affect the canopy.
How do I set up the Canopy, EMF / RF Protective Bed Mat and Powerline PLC HF Filter Grounding Kit?
The EMF / RF Protective Bed Mat is made of one of the strongest protection materials from radiofrequency radiation (RFR) available in the world today but it does in almost every case need grounding/ earthing. When grounding is in place, the mat provides not only protection from RFR below, but equally importantly it protects from low frequency fields/EMFs that it would otherwise collect and radiate which would negate the health benefits received from the RFR reflection.It is therefore imperative that this product is earthed.
Always ensure the EMF / RF Protective Bed Mat is spread out on the floor beneath the bed and covers as wide an area as possible which in turn will provide a complete seal when it connects with the draped canopy.
The best way to earth the canopy and EMF / RF Protective Bed Mat is directly into the ground outside with the aid of a copper pipe, however, this is not always possible so the next best way to ground is with the Powerline PLC HF Filter Grounding Kit.
Please remember to ensure your bed is at least six inches away from any wiring in the walls. If this is not possible, please use an on-demand switch, or better still: turn off the power to your bedroom at night time.
Please view these instructions with a common-sense attitude. If you have the type of fuse box that is easy to cut power to the bedroom, then always try to do that, but remember you should still use your under bed protection if you are above the ground floor to catch any RFR from the floor below.
Where should the EMF / RF Protective Bed Mat be placed?
The EMF / RF Protective Bed Mat should go on the floor underneath the bed. It is important to make sure the EMF Canopy touches the EMF / RF Protective Bed Mat all the way around.
Will my mobile phone work inside the canopy? Can I use my mobile phone to test the frequencies?
Your mobile phone will work in an EMF canopy however we strongly recommend you do not bring it into the canopy. This is because when you bring a mobile phone into an EMF shielded space the mobile phone becomes an EMF repeater which intensifies the EMF frequencies inside the canopy. This is due to your mobile working harder to boost the signal so it can connect to make calls / texts / access the internet.
For this same reason, it isn't accurate or appropriate to test for EMF frequencies inside the canopy using a mobile phone.
